Agilent Keysight N9912A FieldFox Handheld RF Analyzer, 4 GHz
Original price was: $9,999.00.$5,555.00Current price is: $5,555.00.
The Keysight N9912A FieldFox is a portable handheld RF analyzer designed for field engineers. With reliable spectrum analyzing, cable and antenna testing, and rugged construction, it delivers accurate performance in demanding environments.
In stock
The Keysight (Agilent) N9912A FieldFox Handheld RF Combination Analyzer works well in tough conditions. It operates at 4 and 6 GHz. To accelerate your work, each operating mode has a task-driven user interface that saves time in the field. Step up to FieldFox – and boost your readiness.
The Keysight (Agilent) N9912A is mainly a cable and antenna analyzer. It can be set up with a spectrum analyzer. It can also include a 1-port vector network analyzer or a 2-port scalar network analyzer. You can order Keysight (Agilent) FieldFox with additional capabilities: power meter, independent signal generator, and interference analyzer.
Key features of Keysight’s FieldFox handheld RF analyzer include:
- Integrated QuickCal removes the need to carry a calibration kit into the field. It makes cable and antenna tests easier. You can trust its accuracy and repeatability with every measurement.
- FieldFox’s CalReady allows for quick calibration. This makes the unit ready for testing cables and antennas immediately after powering up or being preset.
- A task-driven user interface derived directly from standard field test procedures guides performance tasks naturally and easily.
- Unmatched sweep speed cuts down the time it takes to solve problems. Test times are over 50 percent faster than traditional RF handheld tools.
- Fast fault location with 1001-point resolution and 96-dB dynamic range in the spectrum analyzing mode.
- Versatile field usability with its lightweight (6.2 lbs.), transflective display, backlit keys, simple data transfer, and modern connectivity. The water-resistant chassis withstands wide temperature ranges and humid environments, meeting tough environmental standards (MIL-PRF-28800F).
Measurements
- Cable and antenna analyzer for return loss, one-port cable loss, distance to fault, line sweeping, and VSWR measurements
- Handheld network analyzer (S11, S21, phase, and Smith Chart)
- Handheld spectrum analyzer, optional preamplifier
Return loss and DTF measurements
FieldFox can make both return loss and distance-to-fault measurements at the same time. This helps you correlate overall system degradation with specific faults in the cable and antenna system.
The built-in cable editor allows you to edit existing cable types on-site and save them as new cable types with user-defined names.
CalReady-calibrated at power on and ready to go
Each instrument is CalReady at the RF Out port, following power-on or preset. This means it’s already calibrated and ready to make measurements such as one-port cable loss, VSWR, return loss, and DTF measurements at the test port.
Hassle-free calibration in the field with QuickCal (option)
FieldFox has a built-in calibration capability that allows you to calibrate the network analyzer without carrying a cal kit into the field. With any other test instrument, when you add additional devices to the test port, such as jumper cables or adapters, you need to recalibrate using a cal kit.
FieldFox’s QuickCal supports measurements such as insertion loss/gain, 1-port cable loss, return loss and DTF.
Keysight (Agilent) N9912A Applications:
- Cell site management – cable and antenna test
- RF spectrum monitoring and interference analysis
- Active and passive device test
Configurable Options for the Keysight (Agilent) N9912A:
- N9912A-010 Network analyzer time domain (requires Option 303)
- N9912A-030 Remote control capability
- N9912A-104 4 GHz cable and antenna analyzer. This option is standard in the base price.
- N9912A-106 6 GHz cable and antenna analyzer
- N9912A-110 Transmission measurement (for insertion loss or gain measurement)
- N9912A-111 QuickCal
- N9912A-230 4 GHz spectrum analyzer (requires Option 104), includes tracking generator, independent source
- N9912A-231 6 GHz spectrum analyzer (requires Option 106), includes tracking generator, independent source
- N9912A-235 Preamplifier for spectrum analyzer (requires Option N9912A-230 or N9912A-231)
- N9912A-236 Interference analyzer
- N9912A-302 External USB power sensor support
- N9912A-303 Network analyzer capability (Option 110 recommended)
- N9912A-308 Vector voltmeter
- N9912A-311 Channel power meter
- N9912A-30 Pulse measurements
Includes:
- N9912A-104 – 4 GHz cable and antenna analyzer
- N9912A-231 – 4 GHz spectrum analyzer
- N9912A-110 – Transmission measurement
- N9912A-111 – QuickCal
- User Guide (QR Link)
- Quick Reference Guide (QR Link)
- Power Cord
- 3-year warranty.
- AC Adapter/Charger
- Lithium-ion Battery (installed)
- Unit Shoulder Strap
- Soft Case w/Backpack & Shoulder Strap
Specifications:
- Maximum Frequency: 4 or 6 GHz
- CAT/VNA Start Frequency: 2 MHz
- SA Start Frequency: 5 kHz
- Dynamic Range: 49 dB
- Output Power: <7 dBm
- Trace Noise: n/a
- Number of Built-In Ports: 2 ports
- Best Speed at 201 Point, 1 Sweep: 240 ms
- Instrument Type: Combination Analyzer
- Frequency: 5 kHz to 6 GHz
- Overall Amplitude Accuracy: ±0.5 dB
- Bandwidth Options: 5 MHz
- Frequency Options: 4, 6 GHz
- Maximum Bandwidth Options: n/a
- Standard Attenuator Range: 31 dB
- Standard Attenuator Step: 1 dB
- Maximum Dynamic Range 3rd Order @1 GHz: n/a
This unit remains in excellent condition, the team has fully tested it, and we guarantee its functionality. It comes with a 30-day right of return should it not perform to your expectations.
Options 104 (4 GHz cable and antenna analyzer), 111 (QuickCal), 230 (4 GHz Spectrum Analyzer), 235 (PreAmplifier for Spectrum Analysis Capability), and 311(Channel Power Meter). This unit comes with the accessories shown in the auction pictures. It will also arrive with a fresh calibration performed by an ISO 17025-accredited lab.
Reference
Related products
