GE Sievers 500 RL On-Line TOC Analyzer is a reagentless analyzer designed for continuous monitoring of organics in ultrapure water for pharmaceutical, microelectronics, and power applications
Designed for Real-time Water Release
The Sievers 500 RL On-Line TOC Analyzer is designed to deliver science-based risk management capability to the production floor. This is largely achieved by integrating the trusted Sievers laboratory TOC analysis methodology into a reagentless on-line analyzer that delivers the same high level of analytical process capability associated with laboratory analyzers, but without the delay. The 500 RL thus supports pharmaceutical industry quality initiatives such as Process Automated Technology (PAT) and on-line Cleaning Validation (CV).
Main Configurations
The 500 RL has three main configurations which relate to the type of standards introduction device offered, and each can be upgraded with a variety of options:
- 500 RL with Super iOS
- 500 RL with standard iOS
- 500 RL base model
The new Super iOS (Integrated On-Line Sampling System) is a four-port system that fully automates system protocols, including system suitability, significantly reducing operator time, risks, and costs. The Super iOS can also run single standards and grab samples, like the standard iOS.
Technology
The 500 RL On-Line TOC Analyzer utilizes the patented Sievers membrane conductometric technology, which eliminates false positive and false negative readings to which other technologies are susceptible. Additionally, the Sievers’ technology ensures accurate recovery of all classes of organic compounds commonly found in UPW waters.
Ease of Use Features
The Sievers 500 RL includes a large color touch-screen display, intuitive menu interface, on-screen consumables status indicators, and automated system protocols, such as system suitability verification.
Regulatory Compliance
The Analyzer complies with USEPA-approved Standards Methods 5310C and the proposed USEPA 415.3 for regulatory monitoring. It also complies with ASTM-approved methodologies, and provides security consistent with 21 CFR Part 11.
Specifications
Total Organic Carbon
- Linear Range : 0.03 to 2,500 ppb as C
- Accuracy : ± 5% of measurement
- Precision : < 1% RSD or 0.03 ppb as C, whichever is greater
- Analysis Modes : On-Line, On-Line Averaged, On-Line Timed, Analysis Time Continuous mode: 6 minutes Average and timed modes: 0.5, 1, 4, 8, or 24 hours
- Ozone Compatibility3 : Maximum 200 ppb as O3
- External Flow Rate : Minimum 50 mL/min
- Sample Temperature : 1° C to 95° C (34° F to 203° F)
- Sample Pressure : Up to 100 psig
- Interferences : Insensitive to organic heteroatoms
- Calibration Stability : Typically stable for 12 months
- Display Readout : 3 significant digits
Conductivity
- Raw Conductivity Range4 : 0.01 to 35 μS/cm
- Conductivity Accuracy3,4 : ± 0.005 μS/cm or ± 1%, whichever is greater
- Conductivity Precision : < 0.25% RSD
- Maximum Sample Conductivity : 25 μS/cm at neutral pH
Instrument :
- Power : 100-240 ±10% VAC, 50 Wt 50/60 Hz
- Normal Operating Environment : Intended for indoor use only
- Ambient Temperature : 10° C to 40° C 150° F to 104° F)
- Maximum Relative Humidity : Up to 95%, noncondensing
- Maximum Altitude : 2.300 m {7f546 ft)
- Inputs : One isolated binary input
- Outputs : Three isolated 4-20mA outputs, one Serial (RS-232), one USB port.3 one parallel printer port, tour alarm outputs, and one Ethernet port Category II (protects against transients present in Category II power! Installation/Overvoltage
- Safety Certifications : E*L. CE
- Pollution Degree : 2 (normally only non-conductive pollution)
- Display : Backlit Quarter-VGA touchscreen display
- Dimensions : H: 41.9 cm (16.5 in); W: 48.3 cm 119 in); D: 27.4 cm (10.8 in)
- Weight : 16.9 kg (37.2 lb)
- IP Rating : Environmental Enclosure: IP 45
For More Information : http://www.pmt.co.th/files/br_3_165_D_500RLe_OL.pdf