Agilent 4294A, Keysight 4294A Analisador de Impedância

Impedance Analyzers with the widest measurement range available on the market.

Agilent 4294A, Keysight 4294A Impedance Analyzer is an integrated solution for efficient impedance measurement and analysis of components and circuits. The 4294A covers a broader test-frequency range (40 Hz to 110 MHz) with Basic impedance accuracy:+/-0.08 %. Excellent High Q/Low D accuracy enables an analysis of low-loss components. The wide signal-level ranges enable device evaluation under actual operating conditions.

The test signal level range is 5m V to 1 Vrms or 200 uA to 20m Arms, and the DC bias range is 0 V to +/-40 V or 0m A to +/-100m A. Advanced calibration and error compensation functions eliminate measurement error factors when performing measurements on in-fixture devices. The 4294A is a powerful tool for design, qualification and quality control, and production testing of electronic components. Circuit designers and developers can also benefit from the performance/functionality offered.

Agilent 4294A, Keysight 4294A Features:

• Impedance Parameters: |Z|-Ø, R-X, Ls-Rs, Ls-Q, Cs-Rs, Cs-Q, Cs-D, |Y|-Ø, G-B, Lp-G, Lp-Q, Cp-G, Cp-Q, Cp-D, Complex Z-Y, |Z|-Ls, |Z|-Cs, |Z|-Lp, |Z|-Cp, |Z|-Rs, |Z|-Q, |Z|-D, Lp-Rp, Cp-Rp
• Basic impedance accuracy: ±0.08 %
• Frequency Range: 40 Hz to 110 MHz
• Frequency Resolution: 1 mHz
• Voltage Signal Level: 5 mVrms to 1 Vrms
• Current Signal Level: 200 µArms to 20 mArms
• Internal Bias: 0 to ±40 Vdc; 0 to ±100 mA
• Sweep Parameters: Frequency, Signal Voltage, Signal Current, DC Bias Voltage, DC Bias Current
• Sweep Types: linear, log, list, zero span, manual, up/down
• LAN, GPIB, 8 Bit I/O, 24 Bit I/O, VGA Monitor Interfaces
• 90 to 132 Vac or 198 to 264 Vac; 47-63 Hz operation
• Option 1D5 adds: High Stability Frequency Reference

This unit has a fresh calibration with data report good through January 2020! The 4294A precision impedance analyzer is an integrated solution for efficient impedance measurement and analysis of components and circuits. The 4294A covers a broader test-frequency range (40 Hz to 110 MHz) with Basic impedance accuracy:+/-0.08 %. Excellent High Q/Low D accuracy enables an analysis of low-loss components.

The wide signal-level ranges enable device evaluation under actual operating conditions. The test signal level range is 5m V to 1 Vrms or 200 uA to 20m Arms, and the DC bias range is 0 V to +/-40 V or 0m A to +/-100m A. Advanced calibration and error compensation functions eliminate measurement error factors when performing measurements on in-fixture devices.

The 4294A is a powerful tool for design, qualification and quality control, and production testing of electronic components. Circuit designers and developers can also benefit from the performance/functionality offered. AGILENT CURRENTLY SELLS THIS PRODUCT FOR $35,871 USD.

Biblioteca de Referência

Agilent-4294A-BROCHURE